About Swiss Cheese Plant
Swiss Cheese Plant Introduction
The Swiss Cheese Plant (Monstera adansonii) is a tropical perennial vine native to Central and South America. It is renowned for its distinctive heart-shaped leaves with natural holes or fenestrations, which give it a unique, lacy appearance. These holes are believed to be an evolutionary adaptation that allows the plant to withstand heavy rainfall and high winds in its natural habitat.
Monstera adansonii is an epiphytic climber, meaning it grows on other plants or structures for support in the wild. In its native environment, it can reach impressive heights by climbing up tree trunks. The plant’s aerial roots play a crucial role in this climbing behavior, allowing it to attach to surfaces and absorb nutrients and moisture from the air.
While often confused with its larger cousin, Monstera deliciosa, the adansonii species typically has smaller leaves and a more delicate appearance. Its fast-growing nature and adaptability to indoor conditions have made it a popular houseplant in recent years. The plant’s intriguing leaf structure and relatively easy care requirements have contributed to its status as a favorite among plant enthusiasts and interior designers alike.
Swiss Cheese Plant Care & Growing Guide
Caring for a Swiss Cheese Plant (Monstera adansonii) can be a rewarding experience for both novice and experienced plant owners. This tropical beauty thrives in conditions that mimic its natural habitat, requiring a balance of light, humidity, and proper watering to flourish.
Light is a crucial factor in the health of your Monstera adansonii. It prefers bright, indirect light but can tolerate lower light conditions. Direct sunlight should be avoided as it can scorch the leaves. Placing the plant near a north or east-facing window often provides ideal lighting. If natural light is limited, supplementing with artificial grow lights can be beneficial.
Watering is another key aspect of Monstera adansonii care. The plant prefers consistently moist soil but is susceptible to root rot if overwatered. Allow the top inch of soil to dry out between waterings, and ensure the pot has adequate drainage. Humidity is also important for this tropical plant; misting the leaves or using a pebble tray can help maintain the moisture levels it craves. Regular fertilization during the growing season will support healthy growth and vibrant foliage.
Soil
Monstera adansonii thrives in a well-draining, nutrient-rich soil mix. The ideal composition is a blend of peat moss, perlite, and orchid bark, which provides both moisture retention and excellent drainage. The optimal pH range for this plant is slightly acidic to neutral, between 5.5 and 7.0.
Good drainage is crucial to prevent root rot, a common issue with overwatering. Adding coarse materials like orchid bark or coco coir to the soil mix can improve aeration and drainage. For optimal growth, consider incorporating organic matter such as compost or worm castings to enrich the soil.
Soil problems to watch for include:
1. Poor drainage: Can lead to root rot and fungal issues.
2. Compaction: Restricts root growth and oxygen availability.
3. Inappropriate pH: Can affect nutrient uptake.
4. Salt build-up: Often from over-fertilization, can damage roots.
5. Nutrient deficiencies: May result in yellowing leaves or stunted growth.
6. Root boundness: Can occur if the plant outgrows its pot, restricting growth.
Regular soil checks and appropriate amendments can help maintain optimal soil conditions for your Monstera adansonii.
Fertilizer
Monstera adansonii benefits from regular fertilization during its active growing season (spring and summer). Use a balanced, water-soluble fertilizer diluted to half-strength every 2-4 weeks.
Recommended mixture:
– 10-10-10 or 20-20-20 NPK ratio
– Dilute to half the recommended strength
Fertilizing schedule:
– Spring to Summer: Every 2-4 weeks
– Fall to Winter: Reduce to once every 6-8 weeks or stop completely
Signs of over-fertilization:
– Brown or crispy leaf edges
– White crust on soil surface
– Stunted growth
– Leaf burn or yellowing
Signs of under-fertilization:
– Slow growth
– Pale or yellowing leaves
– Smaller new leaves
Organic fertilizer alternatives:
– Compost tea
– Worm castings
– Fish emulsion (use sparingly due to odor)
Specific nutrient requirements:
– Monstera adansonii particularly benefits from nitrogen for leaf growth
– Magnesium deficiency can cause yellowing between leaf veins
To avoid nutrient build-up, flush the soil with plain water every few months.
Watering
Monstera adansonii prefers consistently moist soil but is susceptible to root rot if overwatered. Allow the top 1-2 inches of soil to dry out between waterings. Water thoroughly until it drains from the bottom of the pot, discarding any excess water in the saucer.
Water quality preferences:
– Rainwater or distilled water is ideal
– If using tap water, let it sit out overnight to allow chlorine to evaporate
Signs of underwatering:
– Drooping or wilting leaves
– Dry, crispy leaf edges
– Slow growth
Signs of overwatering:
– Yellowing leaves, especially lower ones
– Soft, mushy stems
– Mold on soil surface
– Foul odor from the soil
Seasonal changes:
– Reduce watering frequency in winter when growth slows
– Increase watering in spring and summer during active growth
During different growth stages:
– Young plants may require more frequent watering
– Mature plants with established root systems can tolerate slightly drier conditions
Lighting
Monstera adansonii thrives in bright, indirect light. It can tolerate lower light conditions but may grow more slowly and produce smaller leaves with fewer fenestrations. Avoid direct sunlight, especially during the hottest parts of the day, as it can scorch the leaves.
Signs of insufficient light include:
– Slow growth
– Smaller leaves with fewer holes
– Leggy or stretched-out growth
– Pale or yellowing leaves
Signs of excessive light exposure include:
– Scorched or brown patches on leaves
– Curling or crispy leaf edges
– Faded or bleached appearance
If natural light conditions are suboptimal, consider the following adjustments:
1. Move the plant closer to a window, but use a sheer curtain to filter strong light.
2. Rotate the plant regularly to ensure even growth.
3. Supplement with artificial grow lights, especially in low-light environments.
4. Use reflective surfaces or light-colored walls to bounce light onto the plant.
Temperature
Monstera adansonii thrives in warm temperatures, preferring a range between 65Β°F to 80Β°F (18Β°C to 27Β°C). It can tolerate slightly cooler temperatures but should not be exposed to anything below 50Β°F (10Β°C) for extended periods.
Temperature tolerance:
– Monstera adansonii can handle minor temperature fluctuations but prefers stability.
– It’s sensitive to cold drafts and sudden temperature changes.
– Prolonged exposure to temperatures below 50Β°F (10Β°C) can cause damage.
Heat sensitivity:
– While heat-tolerant, extreme temperatures above 90Β°F (32Β°C) can stress the plant.
– High heat combined with direct sunlight can scorch leaves.
Cold sensitivity:
– Cold damage can occur quickly at temperatures below 50Β°F (10Β°C).
– Symptoms include blackened or translucent leaves and wilting.
Protecting from extreme temperatures:
1. Keep away from cold windows and drafty areas in winter.
2. Move indoor plants away from air conditioning vents.
3. Use a thermometer to monitor the plant’s environment.
4. In summer, provide shade and increase humidity to combat heat stress.
5. If outdoors, bring the plant inside when temperatures drop below 55Β°F (13Β°C).
6. Use frost cloths or bring plants indoors if unexpected cold snaps occur.
Humidity
Monstera adansonii prefers high humidity levels, ideally between 60-80%. This tropical plant thrives in moist air conditions similar to its native rainforest habitat.
To increase humidity:
1. Use a pebble tray filled with water
2. Group plants together
3. Use a room humidifier
4. Mist the leaves regularly, preferably in the morning
To decrease humidity (rarely necessary):
1. Improve air circulation with fans
2. Reduce misting and other humidity-increasing methods
Symptoms of low humidity stress:
– Brown, crispy leaf edges
– Curling leaves
– Slow growth
– Increased susceptibility to pests
Symptoms of high humidity stress (uncommon):
– Fungal growth on leaves or soil
– Soft, mushy growth
Effectiveness of humidifying methods for Monstera adansonii:
1. Pebble trays: Moderately effective, best for small plants
2. Misting: Temporarily effective, requires frequent repetition
3. Humidifiers: Most effective, provides consistent humidity
4. Grouping plants: Effective and natural method
5. Bathroom or kitchen placement: Effective if these rooms have adequate light
Propagation
Monstera adansonii can be propagated through stem cuttings or air layering. Here’s a detailed guide for stem cutting propagation:
1. Choose a healthy stem with at least one node and 1-2 leaves.
2. Using clean, sharp scissors or pruning shears, cut the stem just below a node.
3. Remove any leaves from the lower part of the cutting, leaving 1-2 leaves at the top.
4. (Optional) Dip the cut end in rooting hormone to encourage faster root development.
5. Place the cutting in a container with clean water, ensuring the node is submerged but leaves are above water.
6. Position the container in a warm spot with bright, indirect light.
7. Change the water every 3-5 days to prevent bacterial growth.
8. After 2-4 weeks, roots should begin to develop.
9. Once roots are 2-3 inches long, transplant the cutting into a pot with well-draining soil.
10. Keep the soil consistently moist for the first few weeks as the plant establishes.
Comparison of propagation methods:
– Water propagation: High success rate, easy to monitor root growth
– Soil propagation: Can be done directly in soil, but harder to monitor root development
– Air layering: Useful for larger plants, high success rate but more complex
Best time to propagate: Spring to early summer, during the active growing season
Establishment time: 4-8 weeks for roots to develop, additional 2-3 months for the plant to establish in soil
Potting
Monstera adansonii thrives in pots that provide good drainage and room for growth. Here are the key potting requirements:
Pot type:
– Use a pot with drainage holes to prevent water logging
– Plastic, ceramic, or terracotta pots are suitable
– Choose a pot 1-2 inches larger in diameter than the current root ball when repotting
Drainage needs:
– Ensure the pot has adequate drainage holes
– Add a layer of pebbles or broken pottery at the bottom for extra drainage
Repotting frequency:
– Young plants: Every 12-18 months
– Mature plants: Every 2-3 years or when rootbound
Ideal soil composition:
– Mix equal parts potting soil, peat moss, and perlite
– Add orchid bark or coco coir for extra drainage
Signs that indicate repotting is needed:
– Roots growing out of drainage holes
– Water draining too quickly
– Plant becoming top-heavy or unstable
– Slowed growth despite proper care
Root pruning:
– Gently trim away any damaged or rotting roots before repotting
– Trim no more than 20-30% of the root mass
Transitioning to a new pot:
1. Water the plant a day before repotting
2. Gently remove the plant from its current pot
3. Loosen the root ball and trim if necessary
4. Place in the new pot with fresh soil mix
5. Water thoroughly and place in a bright, indirect light
6. Avoid fertilizing for 4-6 weeks after repotting to prevent stress
Pruning
Best Time for Pruning
Spring and early summer, during the active growing season
Frequency
As needed, typically 1-2 times per year
Purpose
- Control size and shape
- Remove damaged or diseased leaves
- Promote bushier growth
- Propagation
Tools
- Clean, sharp pruning shears or scissors
- Rubbing alcohol for sterilization
Step-by-Step Guide
- Sterilize your pruning tools with rubbing alcohol.
- Identify stems or leaves you want to remove.
- Cut stems just above a node at a 45-degree angle.
- For leaves, cut at the base where it meets the stem.
- Remove any yellowed, damaged, or diseased leaves entirely.
- Trim aerial roots if they’re becoming unruly, but leave some for the plant’s health.
- After pruning, mist the plant to reduce stress.
Aftercare
- Reduce watering slightly for a week after pruning.
- Monitor the plant for any signs of stress.
- Resume normal care routine after 1-2 weeks.
Special Considerations
- Avoid pruning more than 25% of the plant at once.
- Save healthy cuttings for propagation.
- Be cautious of the plant’s sap, which can be irritating to skin.
Blooming
Monstera adansonii rarely blooms indoors. In its natural habitat, it may produce flowers during the warm season, typically spring to summer. The blooming period is infrequent and unpredictable in cultivation. When it does occur, the plant produces a spadix (a spike of tiny flowers) enclosed in a spathe, characteristic of the Araceae family. Optimal conditions for blooming include high humidity, warm temperatures, and bright indirect light.
Pests and Diseases
Pests
Common issues
Spider mites, Fine webbing on leaves, stippling or small yellow dots on leaves, overall plant decline, Increase humidity, spray with neem oil or insecticidal soap, wipe leaves with damp cloth regularly
Mealybugs, White, cottony masses on leaves and stems, sticky residue, yellowing leaves, Remove with cotton swab dipped in alcohol, spray with neem oil or insecticidal soap, repeat treatments weekly
Scale insects, Small, brown, oval bumps on stems and leaves, yellowing leaves, sticky residue, Scrape off with soft brush, apply horticultural oil or neem oil, repeat treatments as needed
Diseases
Common issues
Root rot, Yellowing leaves, wilting despite moist soil, brown and mushy roots, foul odor from soil, Remove affected roots, repot in fresh, well-draining soil, reduce watering frequency
Leaf spot, Brown or black spots on leaves, yellowing around spots, leaf drop, Remove affected leaves, improve air circulation, avoid overhead watering, apply fungicide if severe
Powdery mildew, White, powdery coating on leaves, stunted growth, Improve air circulation, reduce humidity, apply neem oil or fungicide, remove severely affected leaves
Special Features
Monstera adansonii is prized for its unique, lacy leaves with natural holes or fenestrations. These distinctive perforations give the plant its common name Swiss Cheese Plant and create an eye-catching tropical aesthetic. The plant’s vining nature makes it ideal for hanging baskets or training up moss poles, allowing for versatile and dramatic displays in interior spaces.
Plant Benefits
While Monstera adansonii is not typically used for herbal or pharmaceutical purposes, it does offer some benefits as a houseplant. It can help improve indoor air quality by removing small amounts of formaldehyde from the air. Additionally, the presence of plants like Monstera adansonii in indoor spaces has been shown to have positive effects on mental health, reducing stress and improving mood and productivity.
Additional Information
Monstera adansonii is often confused with its larger cousin, Monstera deliciosa. While both have fenestrated leaves, M. adansonii typically has smaller leaves with more numerous holes. In its natural habitat, this plant can grow to impressive lengths, climbing up trees in tropical forests. The holes in its leaves are believed to be an adaptation that allows light to reach lower leaves and helps the plant withstand strong winds and heavy rainfall.
Life Cycle
Monstera adansonii is a perennial plant with an indeterminate growth habit, meaning it can continue to grow and produce new leaves indefinitely under the right conditions. In its natural habitat, it starts life as a seedling on the forest floor, then climbs up trees as an epiphyte. The plant goes through juvenile and adult phases, with leaves becoming larger and more fenestrated as it matures. While it can produce flowers and fruits in the wild, this is rare in cultivation, especially indoors. The plant’s growth is most vigorous during spring and summer, with a period of slower growth or dormancy in winter.
Are Swiss Cheese Plant Poisonous, Toxic
Monstera adansonii is toxic to cats, dogs, and humans if ingested. All parts of the plant contain calcium oxalate crystals, which can cause irritation and swelling of the mouth, tongue, and throat if consumed. Symptoms of toxicity include drooling, difficulty swallowing, vomiting, and in severe cases, difficulty breathing. The severity can range from mild to moderate, depending on the amount ingested. If ingestion occurs, rinse the mouth with water and seek immediate veterinary or medical attention. To prevent toxicity, keep the plant out of reach of pets and children, and consider placing it in a hanging basket or on a high shelf.
Frequently Asked Questions
How often should I water my Monstera adansonii?
Water your Monstera adansonii when the top 1-2 inches of soil feel dry. This usually means watering once every 7-10 days, but frequency can vary based on environmental conditions.
Why are the leaves on my Monstera adansonii turning yellow?
Yellowing leaves can be caused by overwatering, underwatering, low humidity, or nutrient deficiencies. Check the soil moisture and adjust your care routine accordingly.
How do I propagate Monstera adansonii?
Monstera adansonii can be propagated through stem cuttings. Cut a stem with at least one node, place it in water or moist soil, and roots will develop in a few weeks.
Is Monstera adansonii toxic to pets?
Yes, Monstera adansonii is toxic to cats and dogs if ingested. It contains calcium oxalate crystals which can cause irritation and swelling in the mouth and digestive tract.
How much light does Monstera adansonii need?
Monstera adansonii prefers bright, indirect light. It can tolerate lower light conditions but may grow more slowly. Avoid direct sunlight as it can scorch the leaves.
Why doesn’t my Monstera adansonii have holes in its leaves?
Young or immature Monstera adansonii plants may not have holes in their leaves. As the plant matures and receives adequate light, new leaves should develop fenestrations.
How often should I fertilize my Monstera adansonii?
Fertilize your Monstera adansonii every 2-4 weeks during the growing season (spring and summer) with a balanced, water-soluble fertilizer diluted to half strength.
How do I increase humidity for my Monstera adansonii?
Increase humidity by misting the leaves, using a pebble tray filled with water, grouping plants together, or using a room humidifier.
When should I repot my Monstera adansonii?
Repot your Monstera adansonii every 1-2 years or when it becomes rootbound. Choose a pot 1-2 inches larger in diameter than the current one.
How do I prune my Monstera adansonii?
Prune your Monstera adansonii in spring or early summer. Remove yellowed or damaged leaves, and trim long vines to control size and promote bushier growth. Always use clean, sharp pruning tools.
Can I grow Swiss Cheese Plant in my indoor space
Difficulty
Intermediate
Size
Medium
Light
Medium
Water
Medium
Flowering
No
Pet Safe
No
Air Purifier
Low
Monstera adansonii botanical details
Common Name
Swiss Cheese Plant
Other Common Names
Mini Monstera, Monkey Mask Plant, Five Holes Plant
Botanical Name
Monstera adansonii
Native Area
Central America and South America
Family Name
Araceae
Plant Type
Perennial vine
Genus
Monstera
Kingdom
Plantae
Photo Gallery
My Swiss Cheese Plant Plant Care Recommendations- Perky Plant fertilizer: https://amzn.to/3RdLA00
- Seaweed extract: https://amzn.to/3z2CsFh
- Rooting hormone: https://amzn.to/3bIXi0t
- Espoma fertilizer: https://amzn.to/3vPa9bs
- Worm compost: https://amzn.to/3HVL01u
- Full-spectrum Light Bulb-Large: https://amzn.to/3yR6VBu
- Full-spectrum Lighting: https://amzn.to/3qhhaiv
- Light meter: https://amzn.to/4dpmp3s
- Moisture meter: https://amzn.to/3TEUu5N
- Hygrometer: https://amzn.to/3Cf6h2F
- Pruning shears: https://amzn.to/3X6oOcg
- ProMix Potting Soil: https://amzn.to/3iVIrjE
- My Organic Green Gourmet Houseplant Fertilizer: healthyhouseplants.storenvy.com
- My Perfect Pumice: Healthy Houseplants Store
- My Organic Green Gourmet Houseplant Fertilizer: Healthy Houseplants Store
Buy Swiss Cheese Plant Online
As an Amazon Associate, I earn commission from qualifying purchases.
Plant Puns and Jokes
Why did the Monstera adansonii go to the doctor? It was feeling a little holey!